Buy your tickets – as easy as 1-2-3.
Ruter's mobile app lets you buy your ticket before you get on board. The app is valid on the Metro, buses, trams, ferries and trains in Oslo and Akershus.
RuterBillett requests access permission to the following functions:
- Read phone status and identity:
Used to protect your ticket from counterfeiting by linking it to your phone's unique ID. RuterBillett does not have access to make phone calls.
- Access precise location (GPS and network-based)
Used in connection with ticket purchases, so that RuterBillett can automatically suggest a ticket based on the zone in which you are located. You can still purchase a ticket even if the location function is turned off, but you must manually enter the stop or station from which the ticket will apply.
- Receive data from internet:
Used to facilitate communication with Ruter's ticketing system when purchasing and downloading tickets to your mobile.
- Receiving data from the internet:
Used when receiving error messages and information from Ruter's ticketing system.
- View network connections
Used during rapid receipt of error messages if the network goes down. This is to enable the customer to get fast notification and not to have to wait for an unnecessarily long time.
- Run from start-up/Autostart from start-up:
Used to send notifications when tickets and payment cards expire.
- Prevent the phone from sleeping
Used to safeguard communication between your phone and Ruter's ticketing system.
- Control of vibration function/vibrator:
Enables vibration on notifications.
- Read synchronisation settings:
Used to ensure that period tickets are updated automatically with a control code and today's picture.
- Use fingerprint hardware
To use fingerprint as an alternative to password.
- Read your contacts
Used when sending tickets to phone numbers stored in your contacts.
- Control near field communication
Used when reading the content of a travel card.
If you want to block access, you can do so from your phone using the "Settings" page.
www.ruter.no
www.ruter.no/kontakt
شراء التذاكر الخاصة بك - سهلة كما 1-2-3.
التطبيق المحمول Ruter ويتيح لك شراء التذكرة قبل ان تحصل على متن الطائرة. التطبيق هو صالح على مترو والحافلات والترام والعبارات والقطارات في اوسلو وآكيرشوس.
تطلب RuterBillett إذن الوصول إلى الوظائف التالية:
- قراءة حالة الهاتف والهوية:
تستخدم لحماية تذكرتك من التزوير من خلال ربطها ID الهاتف الخاص بك فريدة من نوعها. RuterBillett لم يكن لديك الوصول إلى إجراء مكالمات هاتفية.
- وصول الموقع الدقيق (GPS والقائم على الشبكة)
المستخدمة في اتصال مع شراء التذاكر، بحيث RuterBillett يمكن أن تشير إلى تذكرة تلقائيا استنادا إلى المنطقة التي تقع فيها لك. لا يزال بإمكانك شراء تذكرة حتى لو تم تشغيل وظيفة مكان خارج، ولكن يجب أن تدخل المحطة أو المحطة التي سيتم تطبيق التذكرة يدويا.
- تلقي البيانات من الإنترنت:
تستخدم لتسهيل الاتصالات مع نظام التذاكر Ruter عند شراء وتحميل تذاكر لهاتفك النقال.
- استقبال البيانات من الإنترنت:
تستخدم عند تلقي رسائل الخطأ والمعلومات من نظام التذاكر Ruter ل.
- عرض اتصالات الشبكة
استخدمت خلال استلام السريع لرسائل الخطأ إذا يذهب شبكة أسفل. هذا هو لتمكين العملاء للحصول على إخطار سريع وليس لديك إلى الانتظار لفترة طويلة دون داع.
- تشغيل من بدء التشغيل / تشغيل تلقائي من بدء التشغيل:
تستخدم لإرسال إخطارات عندما تنتهي تذاكر وبطاقات الدفع.
- منع الهاتف من النوم
تستخدم لحماية الاتصال بين الهاتف ونظام التذاكر Ruter ل.
- مراقبة وظيفة الاهتزاز / هزاز:
تمكن الاهتزاز على الإخطارات.
- اقرأ إعدادات المزامنة:
استخدامها لضمان يتم تحديثها تلقائيا تذاكر مع رمز التحكم والصورة اليوم تلك الفترة.
- الأجهزة استخدام بصمات الأصابع
لاستخدام بصمة كبديل لكلمة المرور.
- اقرأ جهات الاتصال الخاصة بك
تستخدم عند إرسال تذاكر لأرقام الهواتف المخزنة في جهات الاتصال الخاصة بك.
- مراقبة قرب حقل الاتصالات
تستخدم عند قراءة محتوى بطاقة السفر.
إذا كنت ترغب في منع الوصول، يمكنك القيام بذلك من خلال الهاتف باستخدام صفحة "إعدادات".
www.ruter.no
www.ruter.no/kontakt